How to Create an XP Bootable USB Flash Drive

An XP bootable flash drive is a flash memory device that has been configured to allow you to boot up Windows XP on a computer by plugging in your flash drive device into the USB port. An XP bootable flash drive is highly useful for two purposes:

1. Booting up XP to troubleshoot on any computer that permits the boot.
2. Transporting Windows applications between different physical locations such as home and the office.

To create an XP bootable flash drive, you first need a computer that has BIOS that will permit you to configure its USB port as a configurable device. Then you need a flash memory drive that is set up to be able to act as a booting device. It might not be readily known at first if you have a flash memory drive that is going to boot; one thing to look for when you access a computer's BIOS is whether or not the plugged-in flash drive appears in the listed items on the setup screen. Hopefully this happens, and you can then select this as the first device to check during your boot sequence. Some computers might require that you hit F10 to select your flash memory device.

Assuming that you have the computer and the drive that you need, now you need to get the software that will permit you to condense Windows XP onto your flash memory device. This includes: PE Builder, which is easy to install just by following the directions; you need to install it into your root directory and make a folder in C:PEBUILDER3110a called SRSP1. This will enable you to download Windows Server 2003 Service Pack One to this place. There are only two files you need from it: setupldr.bin and ramdisk.sys. Don't extract anything else, because you may totally corrupt your current version of Windows if you do. Specifically, never run the Windows Server 2003 SP1 executable file.

Once you have these files, run your PE Builder CD (Windows XP Professional CD). Make sure you hold down the [Shift] key to prevent Autostart from launching the CD. Launch PE Builder manually. When the Source field on the main PE Builder screen, enter the letter of the drive in which you put the CD. Check to see that the Output box contains BartPE and that the "None" option is selected in the Media Output panel. Once you have all this squared away, click Build. You can watch the progress of the compression.

When it's complete you're prepared to format and copy the Windows XP Professional bootable image to the UFD with the BartPE USB Installer. Open a Command Prompt window and use the CD command to switch to the pebuilder3110a folder. Next, insert the UFD into a USB port; note the drive letter to which it is assigned, as you'll need to enter it into your next command prompt that you type.

Let's imagine that it was assigned to drive E. You will now type the following command (take note of the last letter in the command). pe2usb -f e:

When Bart is all done, you just hit any key to exit the program, and you have your XP bootable flash drive.



Source: http://EzineArticles.com/?expert=Derek_Rogers

Make Faster your RAM

For you who had the problem with RAM and had Flashdisk that not used,now had a functioning application increased RAM and used flashdisk as the provider RAM. how work that was simple and very appropriate for you who wanted to speed up the achievement of the computer..

This application named Eboostr, was the solution alternativ that resembled Vista’s ReadyBoost and SuperFetch and only was available for Windows XP. eBoostr well-off menaikan the speed and the response from various applications only with used Flash the Disk that played a role as the provider RAM that was empty or cache memory in PC. was us could make use of this application to work with the quite difficult application needed your PC memory resources. With the use eBoostr™ you must not upgrade hardware your computer!

But don't forget to restart your pc after installed this application. Definitely with this application we could determine how many capacities cache flashdisk you who will be made RAM. Almost forgot this application could work with 4 flashdisk at the same time until 4GB per flashdisk. For you who wanted to try could click download.

How to Password Protect and Partition a USB Flash Drive

Knowing how to password protect and partition a USB flash drive is very important to the safety, integrity, and manageability of your data.

When you partition a USB flash drive, you make it so that you can write software into your flash memory while at once running software in another bank of your flash memory (thus you will need a flash memory with at least two banks; one bank = four memory chips). Partitioning is used to enhance manageability, performance, or data availability.

The BIOS command for partitioning your USB flash drive is: Router (config) #partition flash partitions [size1 size2]

Note: if you are running a Cisco 1600 or 3600 series router (modular, multiservice access platforms), your command would be: Router (config) #partition flash-filesystem: [number-of-partitions] [partition-size]

There is software called BootIt that you can download and use to cause Windows XP or Vista to allow you multiple USB flash drive partitions by "Flipping the Removable Bit" that restricts partitioning. However, this software is potentially harmful to your flash memory drive and is not recommended. Two other flash memory partition software packages that are more reliable are Advanced Partition Manager 6.0 (lets you create, copy, resize, and move hard drive partitions without data loss), and Rohos Mini Drive (lets you create a password protected USB drive partition on a guest computer).

Cisco routers permit more than two flash drive partitions (it all depends on how many banks your flash drive has). Every other platform will permit just two partitions.

For password protection of your USB flash memory drive, there is a free program called Cryptainer LE that many people use. Now, to use this program you need to slice up your drive into segments (the software does that for you), but the maximum volume size per segment is 25Mb--meaning that a lot of files that aren't the usual text files can't be protected unless you use multiple drives, which is very cumbersome. Another program that is similar but isn't quite as restricted is Folder Lock, which allows you to set up a password protection system on your PC and then export it to your USB flash drive and then put different folders under digital lock and key in different "lockers".

Another program called Securestix (not free) let's you pick and choose which USB flash drive files you will password protect. Let's face it: some files that are highly valuable to you just don't have any meaning to a would-be identity thief.

Some flash memory drive devices come with password protection software. These typically allow you to designate some files as "public" or "private", and some might even come with fingerprint reading security programming.

Again, knowing how to password protect and partition a USB flash drive is important knowledge that allows you to operate your flash drive with safety and better performance.


Source: http://EzineArticles.com/?expert=Derek_Rogers